一、適合

LD-802ZF系列聚氨酯彈性體灌注機，適合制造工業輪、 滑板輪、葉輪、0A機器、溜冰輪、緩沖器等。

二、特性

1、 機頭：采用特殊混合機構，混合均勻不產生氣泡。

2、 混合頭：理性化設計，原液在混合腔內瞬間能夠得到3段混合，確保產品的混合均勻度。

3、 原料加熱采用導熱油循環加熱，使原料溫度更加準 確。高精度計量泵，變頻調速系統，自動調節配比，準確度 ±0. 5g，并配備*的自動加色系統。

4、 針對彈性體灌注機設計的原液止逆裝置。

5、 系列聚氨酯彈性體灌注機，采用觸摸屏電腦控制，溫度、壓力、轉速顯示控制系統由PLC控制完成。所有數據在觸摸屏上顯示。

6、 系列聚氨酯彈性體灌注機，附有*的真空脫氣裝 置，并有雙重脫氣功能。

三、LD-802ZF系列聚氨酯彈性體灌注機使用條件:

       名稱                                  溫度                   混合比  

A （預聚體）                        40°C -50°C             100

B （M0CA等etc）                38°C - 45°C             100

四、吐出量250g-6000g/min （根據制品大小，為用戶選用合理吐出量）

原料罐容積 A: 100L-300L B: 100L-300L

First,suitable for

LD-802ZF series of polyurethane elastomer perfusion machine, suitable for manufacturing industrial wheel,slide wheel, impeller, OA machine, ice skating, buffer etc..

Second, characteristics

1.Head: the special mixing mechanism, mix evenly without air bubbles.

2.The mixing head: rational design, original 3 section of mixed in the mixing cavity moment can, to ensure that the products of the mixing uniformity.

3.Using thermal oil circulation and air double constant temperature mechanism, the material temperature more accurately. High precision metering pump, stepless speed regulating system, automatic adjusting ratio, accuracy of 

土 0.5g

4.The liquid elastomer perfusion machine design check device.

5.A series of polyurethane elastomer perfusion machine, microcomputer control, temperature, pressure, speed display control system by the control of PC. All the data in the PC display.

6.A series of polyurethane elastomer perfusion machine, a vacuum degassing device of strong, and have double degassing function.

Third, LD-802Dseries of polyurethane elastomer dosing equipment operating conditions:

Forth,Discharge amount 250g-6000g/min (According to the size of products, for customers to choose the reasonable discharge amount)

Tank volume A: 100L-300L B: 100L-300L