美國Transducer Techniques THD-20K LBS測力傳感器  

美國Transducer Techniques THD-20K LBS測力傳感器

Our TLL Series load cells are offered as an economical method for accuray measuring in line tension forces. Best results are obtained when loaded through spherical rod end bearings or similar “universal” mechanical linkage. Ranges 500 through 3,000 lbs. are anodized aluminum, and ranges 5,000 through 50,000 lbs. are manufactured from heat treated 17-4ph stainless steel. The TLL Series sensing areas and cable exit are moisture protected for semi-controlled environments.

參數(shù)

Rated Output (R.O.): 2 mV/V nominal Temp Effect on Output: 0.005% of Load/°F

Nonlinearity: 0.25% of R.O. Temp. Effect on Zero: 0.005% of R.O./°F

Hysteresis: 0.25% of R.O. Terminal Resistance: 350 ohms nominal

Nonrepeatability: 0.1% of R.O. Excitation Voltage: 10 VDC

Zero Balance: 1.0% of R.O. Safe Overload: 150% of R.O.

Compensated Temp. Range: 60° to 160°F DEFLECTION

Safe Temp. Range: -65° to 200°F TLL-500 thru TLL-3K: 0.003 inches

TLL-5K thru TLL-50K: 0.005 inches

訂貨型號

TLL-5K 5,000 3.50 1.125 1.500 3/4-16 UNF 8

TLL-10K 10,000 3.50 1.125 1.500 3/4-16 UNF 8

TLL-20K 20,000 3.75 1.250 1.600 1-14 UNS 14

TLL-30K 30,000 4.25 1.500 1.700 1 1/4-12 UNF 24

TLL-50K 50,000 5.00 1.875 1.825 1 1/2-12 UNF 40

TLL-500 500 .750 1.500 1/4-28 UNF .250 .5

TLL-1K 1,000 .875 1.750 3/8-24 UNF .375 .6

TLL-2K 2,000 .875 1.750 3/8-24 UNF .375 .7

TLL-3K 3,000 1.25 2.000 1/2-20 UNF .500 1.0

THD稱重傳感器

THD SERIES CAPACITY RANGES: 2,000, 3,000, 5,000, 7,500, 10,000, 15,000, 20,000, 30,000, 50,000 LBS.

Our THD Series thru-hole load cells offer an outside diameter of 3.00 inches and up to nine different thru-hole diameter options per capacity range. These load cells are manufactured from heat treated 17-4 ph stainless steel. The sensing element incorporates bonded foil strain gages of the highest quality and are sealed for protection against most industrial environments.

參數(shù)

Rated Output (R.O.): 2 mV/V nominal

Nonlinearity: 0.25% of R.O.

Nonlinearity Hole Diameters Y, Z: 0.5% of R.O.

Hysteresis: 0.25% of R.O.

Nonrepeatability: 0.1% of R.O.

Zero Balance: 1.0% of R.O.

Compensated Temp. Range: 60° to 160°F

Safe Temp. Range: -65° to 200°F

Temp. Effect on Output: 0.005% of Load/°F

Temp. Effect on Zero: 0.01% of R.O./°F

Terminal Resistance: 350 ohms nominal

Excitation Voltage: 10 VDC

Safe Overload: 150% of R.O.

訂貨型號

MODEL CAPACITY

THD-2K 2,000 LBS.

THD-3K 3,000 LBS.

THD-5K 5,000 LBS.

THD-7.5K 7,500 LBS.

THD-10K 10,000 LBS.

THD-15K 15,000 LBS.

THD-20K 20,000 LBS.

THD-30K 30,000 LBS.

THD-50K 50,000 LBS.

INSIDE HOLE DIAMETERS

-P    -Q     -R    -S    -T    -V    -W    -Y   -Z

NOMINAL HOLE DIA. 1/8” 3/16” 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4”

ACTUAL HOLE DIA. .128 .193 .266 .391 .532 .656 .781 1.032 1.281

THC稱重傳感器

THC SERIES CAPACITY RANGES: 250, 500, 1,000, 2,000, 3,000, 5,000, 7,500, 10,000 LBS.

Our THC Series thru-hole load cells offer an outside diameter of 2.00 inches and up to six different thru-hole diameter options per capacity range. These load cells are manufactured from heat treated 17-4 ph stainless steel. The sensing element incorporates bonded foil strain gages of the highest quality and are sealed for protection against most industrial environments.

參數(shù)

Rated Output (R.O.): 2 mV/V nominal

Nonlinearity: 0.25% of R.O.

Hysteresis: 0.25% of R.O.

Nonrepeatability: 0.1% of R.O.

Zero Balance: 1.0% of R.O.

Compensated Temp. Range: 60° to 160°F

Safe Temp. Range: -65° to 200°F

Temp. Effect on Output: 0.005% of Load/°F

Temp. Effect on Zero: 0.01% of R.O./°F

Terminal Resistance: 350 ohms nominal

Excitation Voltage: 10 VDC

Safe Overload: 150% of R.O.

Deflection Inches: 0.002 @ R.O.

訂貨型號

THC-250 250 LBS. -P, -Q, -R, -S, -T, -V

THC-500 500 LBS. -P, -Q, -R, -S, -T, -V

THC-1K 1,000 LBS. -P, -Q, -R, -S, -T, -V

THC-2K 2,000 LBS. -P, -Q, -R, -S, -T, -V

THC-3K 3,000 LBS. -P, -Q, -R, -S, -T, -V

THC-5K 5,000 LBS. -P, -Q, -R, -S, -T, -V

THC-7.5K 7,500 LBS. -P, -Q, -R, -S, -T, -V

THC-10K 10,000 LBS. -P, -Q, -R, -S, -T, -V

-P    -Q     -R    -S    -T    -V

NOMINAL HOLE DIA. 1/8” 3/16” 1/4” 3/8” 1/2” 5/8”

ACTUAL HOLE DIA. .128   .193   .266  .391  .532  .656