TBS-0.50 LBS稱重傳感器 TBS-0.50 LBS稱重傳感器


THA SERIES CAPACITY RANGES: 50, 100, 250, 500 LBS.
Our THA Series thru-hole load cells offer an outside diameter of 1.00 inches and up to two different thru-hole diameter options per capacity range. These load cells are manufactured from heat treated 17-4 ph stainless steel. The sensing element incorporates bonded foil strain gages of the highest quality and are sealed for protection against most industrial environments.
參數(shù)
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.25% of R.O.
Hysteresis: 0.25% of R.O.
Nonrepeatability: 0.1% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.01% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
Deflection Inches: 0.002 @ R.O.
訂貨型號(hào)
THA-50 50 LBS. -P, -Q
THA-100 100 LBS. -P, -Q
THA-250 250 LBS. -P, -Q
THA-500 500 LBS. -P, -Q
DIMENSIONS
-P -Q
NOMINAL HOLE DIA. 1/8” 3/16”
ACTUAL HOLE DIA. .128 .193
SWS SERIES CAPACITY RANGES: 10, 20, 50, 100, 250, 600, 1,000 FT. LBS.
Our SWS Series reaction type socket wrench torque sensors are available in ranges from 10 ft-lbs. through 1000 ft-lbs. and provide accurate measurements of bolt or nut wrenching torques. These sensors are bi-directional so both tightening and break-away torques can be measured. These low cost sensors deliver high accuracy and outstanding frequency response. Calibration of mechanical torque wrenches may be performed with this sensor. The sensing element incorporates bonded foil strain gages of the highest quality.
參數(shù)
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.2% of R.O.
Hysteresis: 0.2% of R.O.
Nonrepeatability: 0.1% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.01% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
訂貨型號(hào)
SWS-10 10 1/4 2.063 1.312 .375 .625
SWS-20 20 1/4 2.063 1.312 .375 .625
SWS-50 50 3/8 2.312 1.312 .500 .875
SWS-100 100 3/8 2.350 1.312 .500 .875
SWS-250 250 1/2 2.625 1.500 .688 1.125
SWS-600 600 3/4 3.938 2.000 1.063 1.625
SWS-1K 1,000 1.0 4.375 1.875 1.125 2.500




























锦州市|
额敏县|
宝丰县|
新安县|
信阳市|
七台河市|
杂多县|
桂平市|
扎囊县|
河曲县|
黑水县|
青川县|
黄龙县|
柘荣县|
侯马市|
沈丘县|
潮安县|
沐川县|
商南县|
惠东县|
孟村|
隆德县|
阳高县|
梁平县|
辽阳县|
中阳县|
昭平县|
芜湖县|
垣曲县|
永兴县|
通城县|
河曲县|
乌什县|
临西县|
乐陵市|
遵化市|
申扎县|
农安县|
加查县|
海原县|
潮安县|