美國Ohmic UPM-DT-10PA超聲功率計,20 mW分辨率OHMIC儀器型號UPM-DT-1PA和UPM-DT-10PA超聲功率計是精密的瓦特表,用于測量診斷和治療超聲波傳感器的功率輸出。UPM-DT系列自1986年以來一直在quan 球范圍內使用,并符合FDA,JCAHO,AAMI和AIUM推薦的測試指南。功率通過輻射方法測量,UPM-DT的精度可溯源至NIST。
UPM-DT-10PA超聲功率計的特點:
•五點認證(NIST 可追蹤)
•高分辨率: 2或20 mW(以克模式為1.5或15 mW)
•測量范圍:0-30瓦•頻率范圍: .5至10 mhz
•測量全部脈沖或連續功率
•自動歸零和穩定
•數字顯示和RS-232接口
•配有便攜箱
UPM-DT-10PA超聲功率計包括的以下附件:
金屬外殼 - 黑色
通用電源
1克校準重量
NIST可溯源校準證書
用戶手冊
Ohmic UPM-DT-10PA超聲功率計,20 mW分辨率英文介紹
OHMIC Instruments Models UPM-DT-1PA & 10PA are precision wattmeters designed to measure the power output of diagnostic and therapeutic ultrasound transducers. The UPM-DT series have been in use worldwide since 1986 and conform to the testing guidelines recommended by FDA, JCAHO, AAMI and AIUM. Power is measured by the radiation methodand the accuracy of the UPM-DT’s are traceable to NIST.Features for the UPM-DT-10PA:• Five point certification (NIST Traceable)• High resolution: 2 or 20 mW (1.5 or 15 mW in grams mode)• Measurement range: 0-30 watts• Frequency range: .5 TO 10 mhz• Measures total pulsed or continuous power• Automatic zeroing and stabilization• Digital display and RS-232 interface• Equipped with carrying case
SAG: UPM-DT-10PA,UPM-DT-10PA超聲功率計,Ohmic超聲功率計,Ohmic UPM-DT-10PA
Ohmic UPM-DT-10PA超聲功率計,20 mW分辨率超聲功率計實物拍攝圖





















南康市|
汶川县|
乌拉特后旗|
海安县|
阿拉善右旗|
新和县|
瑞昌市|
泰来县|
肇庆市|
金昌市|
车险|
碌曲县|
邯郸市|
绥阳县|
神农架林区|
昌都县|
南木林县|
特克斯县|
阜南县|
大英县|
庆元县|
漾濞|
建昌县|
长武县|
根河市|
安阳市|
萨迦县|
噶尔县|
五指山市|
新建县|
黑山县|
庆阳市|
平遥县|
金门县|
缙云县|
南京市|
肃宁县|
大悟县|
四平市|
岐山县|
富顺县|