淋雨試驗箱

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱廣東宏闊試驗設備有限公司
品牌
型號
所在地東莞市
廠商性質其他
更新時間2026/4/30 12:20:13
訪問次數74

產品標簽:

在線詢價收藏產品點擊查看聯系電話

廣東宏闊試驗設備有限公司Grande Automatic Test Equipment Limited,是一家專業從事各種環境試驗檢測儀器設備，力學性能試驗機，振動及沖擊試驗設備，深冷保存箱，超低溫保存箱及冷藏箱等的研究開發與生產，銷售、檢測服務和售后服務的專業公司，擁有GRANDE/宏闊品牌。設備，檢測手段齊全，擁有的技術人才和管理人才，使公司產品在同行中始終處于地位。產品已廣泛應用于科研、大學、電工、電子、軍事、航空、船舶、郵電通信、汽車、摩托車、醫療、包裝、深海，戶外等企事業單位，提供GB、IEC、DIN，JIS,MIL等標準相對應的技術參數制作各類可靠性環境試驗箱及設備，力學性能試驗機，振動及沖擊試驗設備，深冷保存箱，超低溫保存箱及冷藏箱。

宏闊秉承："，品質靠行動，打造的試驗設備"的理念，不斷開發滿足企業檢測需求的高質量產品，全力為提高客戶產品的質量服務。溫度范圍可達：-160℃,-150℃,-120℃,-100℃,-80℃,-70℃,-60℃,-40℃-20℃,0℃~+150℃,200℃,250℃,300℃,400℃,500℃,600℃,700℃,800℃,900℃,1000℃

宏闊按照并且通過ISO9001：2015國際標準質量體系。到目前為止，產品已經出口到100多個國家和地區，同時，我公司的銷售及技術團隊已經到海外30多個國家提供培訓，安裝及售后服務，深受到國內外廣大客戶的好評。

宏闊主要研究，開發，生產，銷售，售后服務及支持，維修以下產品：恒溫恒濕試驗箱,精密真空烤箱，冷熱沖擊試驗箱，高低溫試驗箱,環境模擬試驗箱，高海拔低氣壓模擬試驗箱，溫濕度振動三綜合試驗箱，溫度快速變化試驗箱，鹽水噴霧試驗箱,大型環境試驗箱,老化試驗箱,防水試驗箱,精密干燥試驗箱,真空干燥箱,高低溫沖擊試驗箱，紫外光加速老化試驗箱，防塵試驗箱，換氣式老化試驗箱，砂塵試驗箱，大型高低溫步入試驗室，恒溫恒濕試驗室房，鹽霧恒溫恒濕高溫復合試驗箱，溫度老化箱，氣臂式跌落試驗臺，電磁式高頻振動試驗機，電腦控制振動臺，試驗機，拉力試驗機，-150℃深冷保存箱，-135℃深冷保存箱，-86℃超低溫保存箱，-60℃金槍魚保存箱，-50℃低溫保存箱，-40℃低溫保存箱，-25℃低溫保存箱，避光型冷藏箱，冷藏箱，超低溫冰箱等。

我公司還根據客戶要求提供非標定制服務，歡迎廣大新老客戶前來公司參觀，指導，洽談。

更多詳情，請瀏覽宏闊：

展開顯示更多內容

低溫恒溫試驗箱

產品簡介在線詢價

ConfiguredforyourspecifictestsGrandemakesrainandspraytestingeasierbyofferingastandardchambercapableofpublishedandOEMproprietarytestmethods

淋雨試驗箱產品信息

Configured for your specific tests

Grande makes rain and spray testing easier by offering a standard chamber capable of published and OEM proprietary test methods.

The standardized design can be configured for the rain/spray tests you need, eliminating the guesswork in buying a chamber. The system is based on the specification requirements, and can also accomplish individual automaker’s tests, as well as electrical-enclosure tests.

Our Design

Grande's modular design allows you to add on additional features, depending on the number and type of tests required. One possible choice is to integrate the spray system with a regular temperature and humidity chamber to save money and floor space, while also creating an opportunity to simulate actual operating conditions your product may experience.

Our system uses multiple control solenoids to vary the water's spray volume/pressure. A holding tank prepares the water to the desired temperature, if required. A pump ensures the water is delivered in the proper pressure range. The water is fed to a motorized manifold that rotates the spray arms. Each spray arm has an adjustable valve to allow finer control of the spray.

Testing capabilities

The specification is modeled after and doesn’t differ greatly. Details about the nozzle types and the rotating nature of the spray arms and product table are also included in the requirements. Additionally, drip and car wash tests are also specified.

Heavy splash/shower

· S1 Spray room temperature water with 40 nozzles at 14.2 psi (1 kgf/cm2) for 30 minutes. The flow rate of the water shall be 6.5 gallons/min. (24.5 L/m).

· S2 Spray room temperature water with 40 nozzles at 42.7 psi (3 kgf/cm2) for 60 minutes. The flow rate of the water shall be 10.3 gallons/min. (39.2 L/m).

Light spray/rain

· R1 Spray room temperature water with two nozzles at 4.3 psi (0.3 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.8 gallons/min. (3.2 L/m).

· R2 Spray room temperature water with two nozzles at 1.4 psi (0.1 kgf/cm2) for 10 minutes. The flow rate of the water shall be 0.5 gallons/min. (1.9 L/m).

Examples of OEM automotive manufacturers' requirements

· Heat the sample to a temperature above boiling, then spray with cold water for about two minutes. Repeat cycle.

· Heat the sample to boiling temperature, then spray with room temperature water for about fifteen minutes. Repeat cycle.

· Simulate a car wash by using high pressure spray.

Features

· Rotating rain and spray nozzles designed to JIS specifications

· Speed control for the rotating spray nozzles

· Stationary product shelf - A rotating shelf is optional: see options

· Water pressure regulators, gauges and flow meters

· Special high-volume floor drain system to rapidly drain water out of the chamber

· Interior chamber size is the smallest possible area using the JIS specified nozzles

Applicable Test Methods

· JSA JIS (Japanese Industrial Standard) D 0203 "Method of Moisture, Rain and Spray Test for Automobile Parts"

· SAE (Society of Automotive Engineers) J2245 "Recommended Practice for Splash and Spray Evaluation"

· SAE J575 "Test Methods and Equipment for Lighting Devices and Components"

"The cabinet shall be equipped with a nozzle(s) which provides a solid cone water spray of sufficient angle to completely cover the sample device. The centerline of the nozzle(s) shall be directed downward at an angle of 45 degrees to the vertical axis of a rotating test platform... The device shall be rotated about its vertical axis at a rate of 4.0 ± 0.5 rpm... The water spray test shall continue for 12 hours." ref: SAE J575.

Optional/additional test capabilities:

· Temperature/humidity controlled rain chamber: Includes -20 to 150°C and 20 to 98%RH capabilities

· Water recirculation: Allows re-use of the treated rain water

· Water conditioning: Allows the water to be cooled (5 to 20°C) prior to spray

· High pressure spray: Adds capability to meet car wash test requirement

· Drip nozzle: Adds capability to meet drip test requirement

· Rotating table: Rotates the sample for full exposure to spray

Technical parameters:

Model No		GRT-1728-A			GRT-1728-E(IEC-529)(CNS14165)
Working room(L)		1728			1728
Inner chamber size(mm)WHD		120012001200			120012001200
Exterior chamber size(mm)WHD		175018501300			175018501300
Packaging volume(CBM)		5.5			5.5
G.W.(KGs)		600			600
Water Temperature		Normal			Normal
Spray Type	Total water flow(L/min)	R1	1.8		IP×1	With in 1~1.5mm/min(In drip box)
		R2	3.2		IP×2	With in 3~3.5mm/min(In drip box)
		S1	24.5		IP×3	Angle±600,R:400mm,1.1L/min
		S2	39.2		IP×4	Angle±1800,R:400mm,1.8L/min
	Pressure of spray nozzle (kgf/cm2)	R1	0.1		1.Flow rate of the water=0.07L/min 2.1P×3,Radius:400mm,open holes=16,total water flow:1:1L/min. 3.1P×4,Radius:400mm,open holes=25,total water flow:1:8L/min. *Radius: 200mm,R400mm(For 1P×3,1P×4 only)
		R2	0.3
		S1	1
		S2	3
Test Specimen Frame(RPM)		17RPM			1RPM
Spray Nozzle Rotation Speed		23RPM			Swing 60° from vertical for 4 seconds at one time Swing 180° from vertical for 12 seconds at one time
Material	Inner chamber material	SUS#304
	Exterior chamber material
Other Components		Chamber lamp.Wiper casters with Adjusters		Chamber lamp.Wiper casters with Adjusters
Power supply		C 1Ψ 110V;AC 1Ψ 220V;3Ψ380V 60/50Hz
Customized service		Welcome to Non-standard,Specail requirements,OEM/ODM orders.
The technical information will be subjected to change without notice