德國alre差壓開關JDW-3風壓開關差壓控制器

技術數據
開關容量:1,5 (0,4) A,12-250 V~
接觸:轉換接觸,終端螺絲,金接觸
保護程度:IP 54
四周溫度:-15...+80°C
壓力傳送連接噴管:6,2mm
顏色:黑色

差壓開關JDW-5 JDW-10差壓開關 JDW-5 JDW-10 JDW-3差壓計
JDW-530...500 Pa15...30 Pa5.000 PaG
JDW-10400...1.600 Pa30...60 Pa5.000 PaG

Housing colour: black Monitoring of overpressure, differential

or under-pressure of air and

incombustible, non-aggressive gases.

Exhaust or fan monitoring or fl ow

monitor for securing electrical heat

registers, as fi lter monitoring, air

pressure shortage safeguard, limit

value controller.

JDW- … : Supplied without mounting

bracket; can be screwed on directly

(with 2 screws).

JDW- … Z: Supplied with attached

mounting bracket JZ-10.

JDL … : Supplied with attached

mounting bracket JZ-10.

Note: Once the differential pressure

switch has connected a voltage >

24 V and a current > 0.1 A, the gold

layer at the contacts will have burnt

away. Thereafter, the differential

pressure switch can only be operated

at this or a higher power.

Note: The hose set is not a part

of the delivery scope and must be

ordered separately.

Ambient temperature: – 15 … + 80 °C

Permissible atmospheric

humidity:

max. 95% rel. humidity, non-condensing

Max. sensor temperature

80 °C

Permissible medium

temperature:

– 15 … + 80 °C

Operating voltage: none

Min. switching current: 1 mA

Max. switching voltage: 230 VAC / 50 Hz, 24 VDC

Min. switching voltage: 12 VAC / 50 Hz, 12 VDC

Switching element: microswitch

Switching contact: toggler, gold contact, potential-free

Control function: switches if the pressure is undershot or

exceeded

Pressure connection: 6.2 mm

Mounting / attachment: wall mounting

Electrical connection: screw-type terminals

(JDL-109 / JDL-113 spade plug)

Protection class: II

Protection rating: IP 54 (JDL-109 / JDL-113 IP 20)

Safety and EMC: according to DIN EN 60730

Sensor: pressure membrane

Function type: monitor (JDL-116 A / JDL-117 A controller)