東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

RTP 1305 TFE 15 P-1 PPS

products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.

航天用品

?；诶w維增強復合材料泰科納高性能聚苯硫醚聚苯硫醚（PPS），作出了重要貢獻的空中客車A340和A380飛機的重量減少。這有助于降低油耗和增長幅度和客運能力。聚苯硫醚已經有飛機建設使用的所有基本特征 - 抗高溫和腐蝕性化學物質，硬度，沖擊強度，尺寸穩定性和固有的阻燃阻燃。訣竅是創造合適的結構元素，體現這些屬性。這是通過擠壓成片的聚苯硫醚，相結合，選擇纖維增援，形成高壓下的zui后一部分，在300℃（572℉）。的各個部分，然后從按下的復合材料和制造，焊接在一塊形成的zui后一個組件一起反應釜?；诰郾搅蛎褟?fù)合材料現在被用于許多在飛機制造中的應用，包括機翼的鼻子，副翼和飛機龍骨梁。與鋁相比，使用的聚苯硫醚復合材料提高了設計的自由度，降低了20％至50％的重量和消除腐蝕的可能性

Baseplate for Video Recorder  

Despite the growth of the DVD player market, tape-based videocassette recorders （VCRs） retain an important share of market. Normal product lifecycle cost pressures have driven VCR manufacturers to develop continually lower cost designs for these devices. Typically, the VCR baseplate is produced by outsert molding, with various functional parts such as bearings, guides and fasteners being molded onto the baseplate in a single operation.

Engineers at Toshiba carried this concept even further by combining two different  materials – Hostaform acetal copolymer and  polyphenylene sulfide （PPS） onto the baseplate. Here the special advantages of these two different materials can be exploited simultaneously, making it possible to replace metal die-castings and reduce the number of assembly steps.

CD/MD-Player   

Vectra was able to meet the necessary requirements without any problem. For the lens holder, on the other hand, the important criterion was lightweight coupled with good rigidity to exclude any disturbing high-frequency resonances.

 In various CD/MD players for stationary hi-fi equipment, Sony uses moving magnets instead of the usual rollers. Sony refers to this type of drive as the A-MAX system （Advanced Moving Magnet 2 Axis）. In selecting the materials for this technical solution, the Japanese specialist in entertainment electronics together with Polyplastics （the affiliate in Asia） opted for two materials from : Vectra liquid crystal polymer （LCP） and polyphenylene sulphide （PPS）.Once again, Vectra LCP was able to meet the application requirements. For the slot for the CD carriage, Sony chose glass-fibre-reinforced . The high rigidity and strength of this easyflowing PPS from were crucial here.Vectra is used to produce the baseplate which is movable along two axes. In this application, a mechanical property profile tailored to the special operating conditions in a CD/MD player was required, i.e. high elastic modulus and high impact strength.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

 

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售RTP 1305 TFE 15 P-1 PPS其它產品

銷售 PC 3412R Lexan
銷售 PC 3412HF Lexan

銷售 PC 3412ECR Lexan
銷售RTP 1305 TFE 15 PPS
銷售 PC 2814R Lexan
銷售 PC 263R Lexan
銷售RTP 1305 TFE 13 SI 2 PPS
銷售 PC 261R Lexan
銷售 PC 244R Lexan