東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

RTP Compounds 1300 AR 15 SI 2 PPS

PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C （392° F）. It also shows tremendous stability in both typical and alternative automotive fuels.

Domestic Water Supply Manifold

In Great Britain, domestic water consumption is usually estimated from the household size. However, the installation device for domestic water taps from the British company Atlantic Plastics allows simple connection of a water meter.

Other mouldings in the tap are also made from  polymers. The  shut-off lever and the connector consist of glass-fibre-reinforced Hostaform GV 1/30 owing to its high strength and rigidity. The slip properties of a Hostaform C 9021 K ball in the valve mechanism ensure long-term smooth operation. Finally, the retention clamps, which are subjected to extremely high mechanical loads, are injection moulded from 1140L4 reinforced with 40% glass fibre.In domestic water taps from Atlantic Plastics, a number of  materials ensure permanent smooth operation and freedom from leaks.

In collaboration with Hoechst Technical Polymers Division, UK, extensive FEM and mould flow studies produced a robust casing made from Hostaform C 2521. The demands made on such components are considerable. For example, the casing must withstand a pressure of 12 bar for 50 years and have correspondingly high creep and fatigue strength.

PPS供水歧管

切斷桿和連接器組成的玻璃纖維增強Hostaform GV 1/30，由于其高強度和剛度。防滑性能的Hostaform9021 球閥門機制，確保*順利運作。zui后，保留夾具，受到*的機械載荷，40％玻璃纖維增強聚苯硫醚1140L4注塑成型。特點：Hostaform和水組件進行了優化優異的耐久性，在某些情況下，防滑性能，即使在高負荷。在英國，生活用水通常是從家庭規模的估計。然而，安裝設備允許國內水公司是由英國大西洋塑料水表的簡單連接。在與赫斯特工程聚合物事業部，英國，廣泛的有限元分析和模流研究合作制作了一個堅固的外殼，從Hostaform2521。這些組件所提出的要求是相當可觀的。例如，外殼必須能承受50年的12酒吧的壓力，并有相應的高蠕變和疲勞強度。在自來水的其他成型也從泰科納聚合物制成。

Ferrule

The crucial factors here are Vectra’s good mechanical properties, even in thin wall sections, and the extreme precision with which ferrules can be made. Ferrules can be injection moulded to incorporate holes to carry the 125 μm thick glass fibres to tolerances of 1-2 μm. These ferrules use Vectra grade A460, specially developed for such applications.has been working closely with systems and cable manufacturers to develop a number of special （PPS） grades tailored specifically to the requirements of fibre optic technology. The 8670A61 grade has outstanding flow properties, making it ideal for fine-structured design components such as plug connectors, known as ferrules. Other essential properties for this application are very low water absorption, low creep at high temperatures, good dimensional stability and even shrinkage in both flow and transverse directions. Vectra liquid crystal polymer is also used in fibre optics – particularly for connectors.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

 

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售RTP Compounds 1300 AR 15 SI 2 PPS其它產品

銷售RTP Compounds 1300 AR 15 PPS
銷售RTP Compounds 1300 AR 10 TFE 15 PPS
銷售RTP Compounds 1300 AR 10 TFE 10 PPS
銷售RTP Compounds 1300 AR 10 PPS
銷售RTP Compounds 1300 PPS
銷售Plaslube J-1305/30/TF/15 PPS
銷售Plaslube J-1300/30/TF/15 PPS
MDE Compounds PPS200MG65L PPS
MDE Compounds PPS200MG50L PPS