東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

Latilub 80-10T K/15 PPS

 These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them.

Aerospace Wing and Leading Edge Nose

Fiber-reinforced composites based on ’s high performance  polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380. This helps lower fuel consumption and increase range and passenger capacity.

 

Composites based on PPS are now being used for numerous applications in airplane construction, including the wing nose, the ailerons and the aircraft keel beam. In comparison with aluminum, use of the PPS composites increases design freedom, reduces weight by 20% to 50% and eliminates the possibility of corrosion.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy.

The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）.  Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.

供水歧管

這些組件所提出的要求是相當可觀的。例如，外殼必須能承受50年的12酒吧的壓力，并有相應的高蠕變和疲勞強度。在自來水的其他成型也從泰科納聚合物制成。切斷桿和連接器組成的玻璃纖維增強，由于其高強度和剛度。防滑性能的球閥門機制，確保*順利運作。zui后，保留夾具，受到*的機械載荷，40％玻璃纖維增強聚苯硫醚1140L4注塑成型。特點：Hostaform和水組件進行了優化優異的耐久性，在某些情況下，防滑性能，即使在高負荷。在英國，生活用水通常是從家庭規模的估計。然而，安裝設備允許國內水公司是由英國大西洋塑料水表的簡單連接。在與赫斯特工程聚合物事業部，英國，廣泛的有限元分析和模流研究合作制作了一個堅固的外殼。

errule

has been working closely with systems and cable manufacturers to develop a number of special （PPS） grades tailored specifically to the requirements of fibre optic technology. The 8670A61 grade has outstanding flow properties, making it ideal for fine-structured design components such as plug connectors, known as ferrules.

 

The crucial factors here are Vectra’s good mechanical properties, even in thin wall sections, and the extreme precision with which ferrules can be made. Ferrules can be injection moulded to incorporate holes to carry the 125 μm thick glass fibres to tolerances of 1-2 μm. These ferrules use Vectra grade A460, specially developed for such applications.Other essential properties for this application are very low water absorption, low creep at high temperatures, good dimensional stability and  even shrinkage in both flow and transverse directions. Vectra liquid crystal polymer is also used in fibre optics – particularly for connectors.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售Latilub 80-10T K/15 PPS其它產品

銷售Laticonther 80 GR/50 PPS
銷售Laticonther 80 GR/45 PPS
銷售Laticonther 80 GCE/650 PPS
銷售Laticonther 80 CPG/700 PPS
銷售Zy RS LC1600 NC010
銷售Zy RS LC1600
銷售Zy RS LC1200
銷售Zy RS LC1000
銷售Zy RS LC3090