東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

Fortron MT9205C4 PPS

linear PPS may be used with meltblown and spunbond technologies for melt spun nonwovens.Fiber and monofilament made from PPS can be found in woven or mesh conveyor belts, flame resistant clothing and filtration media.also offers unfilled, high viscosity PPS suitable for extrusion and compression molding to produce slabs, rods and other stock shapes commonly used for prototyping.  

航天用品

聚苯硫醚已經有飛機建設使用的所有基本特征 - 抗高溫和腐蝕性化學物質，硬度，沖擊強度，尺寸穩定性和固有的阻燃阻燃。訣竅是創造合適的結構元素，體現這些屬性。這是通過擠壓成片的聚苯硫醚，相結合，選擇纖維增援，形成高壓下的zui后一部分，在300℃（572℉）。的各個部分，然后從按下的復合材料和制造，焊接在一塊形成的zui后一個組件一起反應釜?；诰郾搅蛎褟秃喜牧犀F(xiàn)在被用于許多在飛機制造中的應用，包括機翼的鼻子，副翼和飛機龍骨梁。

 

與鋁相比，使用的聚苯硫醚復合材料提高了設計的自由度，降低了20％至50％的重量和消除腐蝕的可能性?；诶w維增強復合材料泰科納高性能聚苯硫醚聚苯硫醚（PPS），作出了重要貢獻的空中客車A340和A380飛機的重量減少。這有助于降低油耗和增長幅度和客運能力。

Heat Exchanger  

Only PPS has the necessary resistance to chemicals. This was determined by tests in a water-antifreeze mixture at 150°C over 1000 hours.Drawing their heat supply from circulating water, the fresh air heating units in cars often incorporate a side section made from PPS. This side section is secured by the edge of the metal heat exchanger, which is crimped around it.

Incorporated in the side section are the inlet and outlet connections for the water-antifreeze mixture. The service temperature extends up to 140°C.

PPS was the only material to display the strength previously specified. Its excellent mechanical properties, such as high strength values, moduli and low tendency to creep, meet the designers exacting requirements. PPS high dimensional stability makes it possible to meet the fine tolerances this application requires .

PPS 

Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them. These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.

PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C （392° F）. It also shows tremendous stability in both typical and alternative automotive fuels.

Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

 

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售Fortron MT9205C4 PPS其它產品

銷售Fortron MT9320C0 PPS
銷售Zy HTN54G35EF BK420

銷售Zy HTN54G15HSLR NC010
銷售Fortron MT9203HS PPS
銷售Zy HTN54G15HSLR BK031
銷售Zy HTN53G60LRHF BK083
銷售Fortron MT9141L4 PPS
銷售Zy HTN53G50LRHF NC010
銷售Fortron MT9140L6 PPS