東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

Electrafil J-1305/CF/20 PPS

f your design challenges require high temperature stability, broad chemical resistance, stiffness, strength and creep resistance at elevated temperature, consider Polyphenylene Sulfide （PPS）.

Fuel Cell End Plates

Intervening insulating plates have bored manifold to feed hydrogen fuel, oxidizing air and cooling water to the stack, as well as to remove the water produced during cell operation. Even with automated machining, the two sets of plates can cost from $300 to $500. ’s development work suggests that integrated injection-molded plates combining end and insulating components may reduce plate cost to between $100 and $120 per stack while also reducing stack weight by at least 10 lb （4.95 kg）.Injection-molded end plates made from ’s polyphenylene sulfide （PPS） can provide significant cost and weight savings in proton exchange membrane （PEM） fuel cells. Design changes integrating the end plate and the adjacent insulating plate may reduce cost and weight as much as 90% compared to current fuel cell prototypes employing metal.A PEM fuel cell assembly contains a stack of about 200 series-connected cells. The stack is held together through bolting from the end plates to hold the bipolar plates in the stack together and compress the gaskets between them.

PPS換熱器

使用聚苯硫醚1140L4原因.借鑒他們的供熱循環水，清新的空氣在汽車中的供熱單位往往納入聚苯硫醚，從一個側面部分。本方部分抵押的金屬換熱器，這是它周?chē)木砬倪吘墶?cè)面部分納入水防凍劑的混合物的進口和出口連接。延伸服務溫度高達140°C 只有聚苯硫醚具有必要的抗化學品。這是由水防凍液混合測試確定在150℃以上1000小時。聚苯硫醚是*的材料顯示先前的力量。其優良的機械性能，如高強度值，彈性模量和低蠕變傾向，滿足設計師的嚴格要求。聚苯硫醚的尺寸穩定性高，使得它能夠滿足此應用程序需要精細的公差。

Aerospace Wing and Leading Edge Nose

Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance  polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380.This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）.

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

 

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售Electrafil J-1305/CF/20 PPS其它產品

銷售Zy 42A NC010
銷售DIC.PPS ZL-130 PPS
銷售Zy 145 BK010
銷售Zy 135F NC010
銷售DIC.PPS Z-240 PPS
銷售Zy 132F BKB501
（復制） 銷售Zy 114HSL BK000
銷售DIC.PPS Z-230 PPS
銷售DIC.PPS Z-200 PPS