東莞龍輝祥塑膠原料公司自2002年6月成立以來,建立了完整的市場供應系統。以市場為導向，積極參與市場競爭，不斷*規范化管理，使企業經營規模不斷發展壯大共同進步,共同發展，本公司*經營各國塑膠原料通用塑料：ABS、AS、GPPS、HIPS、PP、PE；食品級ABS、AS、PS、PP工程塑料：:COC鏡頭料，PMMA,POM,PC、PC/ABS、PA6/66、PA6、PBT、PET、ASA、PPO...

CoolPoly E5107 PPS描述：

CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding characteristics.

PPS

  These grades also meet European Directive 2002/72/EC for food contact applications and BfR （German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine） standards.PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance.PPS is insoluble in all known solvents below 200°C （392° F）. It also shows tremendous stability in both typical and alternative automotive fuels. Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance.Certain grades of PPS comply with ISO 10993 and USP Class VI, and Drug （DMF 14844） and Device （MAF-1097） Master Files have been created for them.

Aerospace Wing and Leading Edge Nose

 This helps lower fuel consumption and increase range and passenger capacity.PPS already had all the basic characteristics for use in aircraft construction – resistance to high temperatures and aggressive chemicals, hardness, impact strength, dimensional stability and inherent flame-retardancy. The trick was to create suitable structural elements embodying these attributes. This is done by extruding the PPS into film, combining it with chosen fibrous reinforcements and forming the final part under high pressure at 300°C （572°F）.  Individual parts are then fabricated from the pressed composites and welded together in an autoclave to form the final component as one piece.Fiber-reinforced composites based on ’s high performance  polyphenylene sulfide （PPS） make an important contribution to weight reduction of the Airbus A340 and A380.

供水歧管

特點：優化優異的耐久性，在某些情況下，防滑性能，即使在高負荷。在英國，生活用水通常是從家庭規模的估計。然而，安裝設備允許國內水公司是由英國大西洋塑料水表的簡單連接。在與赫斯特工程聚合物事業部，英國，廣泛的有限元分析和模流研究合作制作了一個堅固的外殼，這些組件所提出的要求是相當可觀的。例如，外殼必須能承受50年的12酒吧的壓力，并有相應的高蠕變和疲勞強度。在自來水的其他成型也從泰科納聚合物制成。切斷桿和連接器組成的玻璃纖維增強，由于其高強度和剛度。，確保*順利運作。zui后，保留夾具，受到*的機械載荷，40％玻璃纖維增強聚苯硫醚注塑成型。

產品圖片

東莞市龍輝祥塑膠原料公司是一家專業從事塑膠原料進口貿易公司。主營各國通用塑膠、工程塑膠、特種工程塑膠。公司以“誠信為本，創新求魂”的精神在客戶中樹立了良好的口碑。從進口到出口嚴格把關，可提供COA,SGS,UL黃卡!保證原廠原包!我是龍輝祥，期待你的來電! 

 

電  話：

傳  真： 

手  機：

：羅（業務）

 

 

 

 

 

:羅長龍　
:　
傳真號碼:
地址:中國廣東東莞市樟木頭鎮塑膠原料市場

銷售CoolPoly E5107 PPS其它產品

銷售Zy 70G33L BK031
銷售CoolPoly E5105 PPS
銷售Zy 70G33HS1L BK031
銷售Zy 70G33HS1L BK031
銷售CoolPoly E5101 PPS
銷售CoolPoly D5112 PPS
銷售CoolPoly D5110 PPS
銷售Zy 70G33GRA BK350
銷售CoolPoly D5108 PPS