Fortron 1130A64 PPS Polyplastics
Fortron 1130A64 PPS Polyplastics
Fortron 1140A1 PPS Polyplastics
Fortron 1140A6 PPS Polyplastics
Fortron 1140T11 PPS Polyplastics
Fortron 1150A6 PPS Polyplastics
Fortron 1130A64 PPS Polyplastics材料物性表如下:
| Physical | Nominal Value | Unit | Test Method |
| Specific Gravity | 1.57 | g/cm3 | ASTM D792, ISO 1183 |
| Molding Shrinkage | No Standard | ||
| Across Flow: 2.00 mm | 0.70 | % | |
| Flow: 2.00 mm | 0.40 | % | |
| Water Absorption | |||
| 23°C, 24 hr | 0.010 | % | ASTM D570 |
| 23°C, 24 hr | 0.040 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Strength | 170 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation | |||
| Break | 1.8 | % | ASTM D638 |
| Break | 1.9 | % | ISO 527-2 |
| Flexural Modulus | |||
| -- | 11000 | MPa | ASTM D790 |
| -- | 10500 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 215 | MPa | ASTM D790 |
| -- | 230 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | 7.0 | kJ/m2 | ISO 179/1eA |
| Notched Izod Impact | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 265 | °C | ASTM D648, ISO 75-2/A |
| CLTE 3 | ASTM D696, No Standard | ||
| Flow | 0.000020 | cm/cm/°C | |
| Transverse | 0.000040 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
| Volume Resistivity | |||
| 3.00 mm | 8.0E+15 | ohm·cm | ASTM D257 |
| -- | 8.0E+15 | ohm·cm | IEC 60093 |
| Dielectric Strength | |||
| 3.00 mm | 12 | kV/mm | ASTM D149 |
| 3.00 mm | 15 | kV/mm | IEC 60243-1 |
| Dielectric Constant | ASTM D150, IEC 60250 | ||
| 1 kHz | 4.20 | ||
| 1 MHz | 4.20 | ||
| Dissipation Factor | ASTM D150, IEC 60250 | ||
| 1 kHz | 0.0010 | ||
| 1 MHz | 0.0020 | ||
| Arc Resistance | 123 | sec | No Standard |
| Comparative Tracking Index (CTI) | 125 | V | UL 746 |
| Comparative Tracking Index | 125 | V | IEC 60112, ASTM D3638 |
VAMPALLOY 0023 V0 E ABS+PC Vamp Tech
DIC.PPS FZ-1150 PPS Dainippon Ink
DIC.PPS FZ-2140-D7 PPS Dainippon Ink
DIC.PPS FZ-3500 PPS Dainippon Ink
:鄧
:86-
傳真號碼:86-
地址:中國 廣東 東莞 東莞市 樟木頭鎮 塑膠原料市場
Fortron 1130A64 PPS Polyplastics玻纖30%其它產品
Fortron 1130A64 PPS Polyplastics玻纖30%
Fortron 1130A6 PPS Polyplastics玻纖
Fortron 2220A49 PPS Polyplastics韌性
Fortron 1130A64 PPS Polyplastics韌性
Fortron 1130A6 PPS Polyplastics玻纖增強
Fortron 1130A1 PPS Polyplastics玻纖30%
Fortron 0220A9 PPS Polyplastics超高韌性
Fortron 1140A7 PPS Polyplastics玻纖40%
Fortron 1140A66 PPS Polyplastics玻纖40%
Fortron 1140A65 PPS Polyplastics玻纖40%

















隆回县|
江城|
巴马|
北碚区|
永城市|
通榆县|
江陵县|
凯里市|
鄱阳县|
黎城县|
儋州市|
天峻县|
汝南县|
太原市|
定远县|
开鲁县|
武汉市|
康保县|
昔阳县|
石柱|
兴义市|
清苑县|
安新县|
静海县|
湖南省|
大丰市|
伊宁县|
赞皇县|
海丰县|
乌苏市|
海阳市|
阳原县|
绥中县|
灵丘县|
固镇县|
玉林市|
八宿县|
湘潭市|
军事|
龙江县|
镇康县|