GWE管材彎曲試驗機
【簡單介紹】
【詳細說明】
塑料管材彎曲試驗機
用途
塑料管材彎曲試驗機適用于絕緣電工套管等材料的彎曲試驗,彎曲的總角度為180,試驗后觀察試樣有無裂痕。符合:GB/T14823.2《電工安裝用導管特殊要求剛性絕緣材料平導管》、JG/3050-1998《建筑用絕緣電工套管及配件》及ZBG33008《聚氯乙烯塑料波紋電線管》等要求. 本試驗機能在一臺設備上測試標準規定的三種導管,不需要更換成形模及彎曲型錕。且操作方便、直觀可靠,因此,應用愈來愈廣。
塑料管材彎曲試驗機技術參數: GWE
1、 試樣導管直徑:16mm 20mm 25mm
2、成形模槽底半徑:48mm 60mm 75mm
3、彎曲型錕中心軌跡半徑:84mm 10mm 131.25mm
4、成形模及彎曲型錕槽半徑:8.1mm 10.1mm 12.6mm
5、彎曲型錕槽底直徑:24mm 30mm 37.5mm
6、試樣彎曲總角度:180
7、外形尺寸350×320×850
8、重量: 30Kg
Plastic pipe bending machine
use
Such as plastic pipe bending machine is suitable for electrical insulation casing material bending test, bending Angle of total was $180, after test observation samples with and without cracks.: GB/T14823.2 the electricians install flat tube with catheter special request rigid insulation materials ", JG / 3050-3050 "building electrical insulation casing and accessories" and ZBG33008 PVC plastic corrugated wire and tube and other requirements. This trial function on one device test standard stipulated by the three types of catheter, do not need to change the forming mold and curved kun.And easy to operate, intuitive and reliable, therefore, more and more widely used.
Plastic tubing bending machine technical parameters:
1, sample tube diameter 16 mm: 20 mm to 25 mm
2, forming die radius of the bottom of the channel: 48 mm 60 mm to 75 mm
3, kun center track curved radius: 10 mm to 131.25 mm 84 mm
4, forming die and curved kun chamfer radius: 8.1 mm to 10.1 mm to 12.6 mm
5, kun curved groove bottom diameter: 24 mm to 30 mm to 37.5 mm
6, specimen bending Angle: 180
7, appearance size 350 * 320 * 320
8, weight: 30 kg
請輸入產品關鍵字:

QQ交談

绵竹市|
苏州市|
绩溪县|
邵阳县|
鹤山市|
广饶县|
卓资县|
西丰县|
五华县|
娱乐|
梓潼县|
乐安县|
神木县|
江都市|
防城港市|
绥芬河市|
辰溪县|
渭南市|
新建县|
峡江县|
广丰县|
开平市|
邓州市|
鄄城县|
敦煌市|
淮南市|
奉新县|
罗定市|
扶绥县|
炎陵县|
于都县|
观塘区|
禄丰县|
滁州市|
塔城市|
利辛县|
保定市|
林西县|
仁布县|
都昌县|
奇台县|