注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
四川川大干燥科技工程有限責任公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地成都市
塑料機械網采購部電話:0571-88918531
QQ:2568841715
聯系方式:查看聯系方式
更新時間:2023-07-26 23:18:56瀏覽次數:192次
聯系我時,請告知來自 塑料機械網暫無信息 |
方形篩一、工作原理及應用范圍介紹IntroductionofWorkingPrincipleandScopeofApplication本機上部采用快拆式手柄,把整機連成一個整體,上蓋采用全密封、有效防止物料在過篩時由于振動而產生粉塵飛揚
方形篩
一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application
本機上部采用快拆式手柄,把整機連成一個整體,上蓋采用全密封、有效防止物料在過篩時由于振動而產生粉塵飛揚。篩體下部安裝振動電機,有效保證了物料的結構緊溱,下部采用彈簧減振,使整機在平穩狀態下工作,下面底部采用可調試,可微調篩面傾斜角度,根據物料特性以取得理想的過篩效果。該機廣泛應用于制藥、食品、雞精、化工、飼料、獸藥、礦產、糧食等行業的連續大批量生產運行。
The fast disassembly-type handle is provided at the upper part of the equipment to integrate the whole machine; the cover is fully sealed to effectively prevent the flying dust due to vibration during the material screening. The vibration motor is installed at the lower part of the screen to effectively ensure the compact structure of materials; the spring vibration attenuation is adopted at the lower part to ensure the whole machine operating at stable status, and adjustable incline angle of screen at the lower part may be adjusted according to the material property to obtain the best screening effect. This equipment is widely applied in thepharmacy, food, chicken essence, chemical, feed, veterinary drug, mineral, and grain industries for continuously large-batch production and operation.
二、特點Characteristics
1. 該機具有結構簡單、操作方便、體積小。
2. 處理量大、噪音低、低故障、壽命長。
3. 生產率高、振幅可調、耗能低。
4. 拆裝方便、清洗、無粉塵等優點。
1. The equipment is simple in structure, convenient for operation and small in volume.
2. It has large treatment volume, low noise, little failure, and long service life.
3. It has high productivity, adjustable amplitude and low energy consumption.
4. It is convenient for dismounting without dead angle for cleaning and dust.
三、技術參數(下表中數值僅供選型時參考)
Technical parameters (the values in the table below are for reference in type selection only)

四、外形簡圖Dimension sketch

您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
號碼可能有誤,請核對!
請選擇省份
聯系方式
四川川大干燥科技工程有限責任公司
乐亭县|
伊宁县|
宣汉县|
宜宾市|
东山县|
博乐市|
金溪县|
四川省|
贞丰县|
昌吉市|
五常市|
兴安盟|
金山区|
崇仁县|
横峰县|
天气|
耿马|
固安县|
中超|
城固县|
延庆县|
灵武市|
易门县|
平顶山市|
丽江市|
林州市|
长治市|
汶川县|
巢湖市|
新和县|
沂水县|
怀柔区|
邵阳市|
巩留县|
新干县|
张北县|
巩义市|
夹江县|
巴马|
黑龙江省|
栾川县|
