working temperature：ordinary temperature
工作溫度：普通溫度
standard：ISO9001
標準：ISO9001
applicable medium：water
適用介質：水
type of connection：butt welding
連接方式：對縫焊接
drive mode：manual
驅動方式：人工操作
material：stainless steel，carbon steel
材質：不銹鋼，碳鋼
type：self-operated
類型：自動型
transport package：plywood case
運輸包裝：膠合板箱
specification：60KG/PC
規格：60KG/PC
brand：GUTE
商標：GUTE
The body type of control valve is a lot of, commonly used through single seat, through double seat, Angle, diaphragm, small flow, tee, eccentric rotation, butterfly, sleeve type, spherical, etc.In the specific selection, the following considerations can be made:
1. It is mainly considered according to the selected flow characteristics, unbalanced forces and other factors.
2. When the fluid medium is a suspension containing a high concentration of wear particles, the internal material of the valve should be hard.
3. As the medium is corrosive, try to choose a simple valve structure.
4. When the medium temperature, pressure and high change, should choose the valve core and valve seat material by temperature, pressure change small valve.
調節閥的閥體類型有很多，常用的通單座、通雙座、角座、隔膜、小流量、三通、偏心旋轉、蝶閥、套筒式、球面式等。在具體選型時可做以下考慮:
1. 主要是根據所選的流動特性、不平衡力等因素進行考慮。
2. 當流體介質為含有高濃度磨損顆粒的懸浮液時，閥的內部材料應堅硬。
3.由于介質具有腐蝕性，盡量選用簡單的閥門結構。
4. 當介質溫度、壓力變化較大時，應選擇受溫度、壓力變化較小的閥芯和閥座材料。
5. 閃光和空化只發生在液體介質中。在實際生產過程中，閃蒸和汽蝕都會形成振動和噪聲，縮短閥門的使用壽命，因此應選用防止閃蒸和汽蝕的閥門。
1. There are various types of control valves, and their applications are different. Therefore, the type of control valve should be reasonably selected according to the requirements of the production process.
2. Pneumatic control valves are divided into two types: gas opening and gas closing.The gas-open control valve closes in the failure state, and the gas-close control valve opens in the failure state.Some auxiliary equipment can be used to form a protection valve or to make the control valve self-lock, that is, the control valve to maintain the failure before the valve opening.
3. The way of gas opening and gas closing can be achieved through the type of positive and reactive actuator and the combination of positive and anti-body valves. When using the valve positioner, it can also be achieved through the valve positioner.
4. Various control valves have their own characteristics with different structures.
1. 控制閥的種類繁多，其應用也各不相同。因此，控制閥的類型應根據生產工藝的要求合理選擇。
2. 氣動調節閥分為氣開和氣關兩種。氣開控制閥在故障狀態關閉，氣閉控制閥在故障狀態打開。一些輔助設備可以用來形成保護閥或使控制閥自鎖，即控制閥在閥門開啟前保持故障。
3.通過正、反式執行機構的型式以及正、反閥體相結合的方式來實現開、關氣的方式。在使用閥門定位器時，也可以通過閥門定位器來實現。
4. 各種控制閥結構不同，各有特點。
QQ:2568841715
广水市|
文成县|
黄梅县|
金湖县|
兴城市|
巴塘县|
龙川县|
东乡族自治县|
谷城县|
乐陵市|
灵山县|
新疆|
本溪市|
左云县|
常宁市|
富锦市|
灵台县|
吉安县|
富民县|
鄂尔多斯市|
临桂县|
甘谷县|
浙江省|
汉寿县|
竹山县|
罗江县|
彰化县|
石楼县|
淮北市|
观塘区|
高台县|
郧西县|
台前县|
察雅县|
三江|
永昌县|
阳城县|
同江市|
永福县|
辽阳县|
高雄县|