注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
行業產品
上海瑞億儀器有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地上海
塑料機械網采購部電話:0571-88918531
QQ:2568841715
聯系方式:查看聯系方式
更新時間:2025-04-14 12:03:48瀏覽次數:92次
聯系我時,請告知來自 塑料機械網暫無信息 |
用nascotanksampler采樣器很方便的采集有特定深度的樣品
用nasco tank sampler采樣器很方便的采集有特定深度的樣品??刹杉叨?.05米。有兩個相鄰1.53米的螺絲將其擰在一起,可調節其擴展長度。取樣器是由一個硬的有韌性的直徑為1.9厘米的特殊塑料管材制成。采樣器容量為89ml/30.5cm。
用法:使用:
1。螺桿的兩節連起來,可以根據采樣點的具體深度進行調節(即采樣器一般以0.3米為標準)增加的量。
2。拉按住不銹鋼絲上方的打開閥門,使液體源源不斷的流進采樣器。
3。釋放鋼絲使閥門關閉,里面的樣本被保存。
4。釋放樣本,按住取樣器中間約成15度角傾斜,拉線,用一個合適的容器盛放(Whirl-Pak® ®無菌袋),或按住采樣器的底部,這樣將釋放閥門,樣本便會自動流出。這個采樣器不是高壓消毒器械,請不要在超過華氏165度(即74℃)的溫度下使用。
Taking a sample at a specific depth is easy with Nasco’s Tank Sampler. Available as a 10-ft. (3.05 m) unit, it is made up of two 5-ft. (1.53 m) sections that screw together. An extension section is available to extend the length. The sampler is made of a tough, 3/4" (1.9 cm) diameter, special plastic pipe. Sampler holds approximately 3 oz. per foot (89 ml per 30.50 cm).
To use:
1. Screw the two sections together and lower the unit to the specific depth required (the sampler is marked in 1 ft. (.3 m) increments.
2. Pull and hold the stainless steel wire at the top which opens the valve, allowing the liquid to flow in.
3. Release the wire allowing the valve to close, trapping the sample inside.
4. To release the sample, hold the sampler in the middle at about a 15° angle and pull the wire, holding the end over an appropriate container (Whirl-Pak® bag), or press and hold the pin on the bottom against a hard surface such as the bottom of a pail. This will release the valve and the sample will flow out. The sampler is not autoclavable, do not use at temperatures over 165° F (74° C).
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
號碼可能有誤,請核對!
請選擇省份
聯系方式
上海瑞億儀器有限公司
阿巴嘎旗|
平顺县|
肃北|
陇西县|
庆安县|
闽侯县|
神木县|
和政县|
三亚市|
嘉兴市|
南涧|
沐川县|
昌黎县|
揭阳市|
天门市|
饶阳县|
舞钢市|
北宁市|
邵阳市|
于田县|
虞城县|
永善县|
辽阳市|
建湖县|
隆安县|
南江县|
成安县|
建平县|
綦江县|
延安市|
平定县|
台湾省|
庆城县|
阆中市|
岑溪市|
开阳县|
黄梅县|
平潭县|
朝阳市|
白银市|
山阳县|
