XJJ--5/50 簡支梁沖擊試驗機

                             
一. 產品介紹
該儀器主要用于硬質塑料、增強尼龍、玻璃鋼、陶瓷、鑄石、電絕緣材料等非金屬材料沖擊韌性的測定，是化工行業、科研單位、大專院校質量檢測等部門理想的試驗設備。
二、符合標準：
◎GB/T 1043-2008《硬質塑料簡支梁沖擊試驗方法》；
◎GB/T 1843-2008《塑料懸臂梁沖擊試驗方法》；
◎ISO 179:2010《Plastics-Determination of Charpy impact properties》；
◎ISO 180:2000《Plastics-Determination of Izod impact strength》；
◎GB/T 18743-2002《流體輸送用熱塑性塑料管材簡支梁沖擊試驗方法》（即適用于管材沖擊）
三、主要技術參數
1 沖擊能量；1J 2J 4J 5J 7.5J 15J 25J 50J任選
2 擺錘預揚角：160 度
3 沖擊速度：  2.9m/s（小于5J）  3.8m/s （大于5J）
     4 沖擊刀刃夾角：30°
     5 鉗口圓角半徑：R1mm
     6 沖擊刀刃圓角半徑：R2mm
7  鉗口支距:40mm  60mm 70mm 95mm
8  刻度盤分度值：1%
9  試樣類型、尺寸、支撐跨距如下表
試樣
類型 長度l 寬度b 厚度d 支撐線
間距離L
 基本尺寸 極限偏差 基本尺寸 極限偏差 基本尺寸 極限偏差 
1 80 +2 10 +0.5 4 +0.2 60
2 50 +1 6 +0.2 4 +0.2 40
3 120 +2 15 +0.5 10 +0.5 70
4 125 +2 13 +0.5 13 +0.5 95

XJ--5/50 數顯y液晶屏簡支梁沖擊試驗機
                    
一. 產品介紹
該儀器主要用于硬質塑料、增強尼龍、玻璃鋼、陶瓷、鑄石、電絕緣材料等非金屬材料沖擊韌性的測定，是化工行業、科研單位、大專院校質量檢測等部門理想的試驗設備。
二、特點
 1 采用圓光柵測角技術，具有精度高、穩定性好和測量范圍大等特點
 2 具有數字化測量計算沖斷功、沖擊強度、計算一批試樣的平均值等功能
 3 預仰角、 升角校驗方便
 4 顯示方式：液晶
三、符合標準：
◎GB/T 1043-2008《硬質塑料簡支梁沖擊試驗方法》；
◎GB/T 1843-2008《塑料懸臂梁沖擊試驗方法》；
◎ISO 179:2010《Plastics-Determination of Charpy impact properties》；
◎ISO 180:2000《Plastics-Determination of Izod impact strength》；
◎GB/T 18743-2002《流體輸送用熱塑性塑料管材簡支梁沖擊試驗方法》（即適用于管材沖擊）主要技術參數
1 沖擊能量；1J 2J 4J 5J 7.5J 15J 25J 50J任選
2 擺錘預揚角：160 度
3 沖擊速度：  2.9m/s（小于5J）  3.8m/s （大于5J）
     4 沖擊刀刃夾角：30°
     5 鉗口圓角半徑：R1mm
     6 沖擊刀刃圓角半徑：R2mm
7 鉗口支距:40mm  60mm 70mm 95mm
8 試樣類型、尺寸、支撐跨距如下表
試樣
類型 長度l 寬度b 厚度d 支撐線
間距離L
 基本尺寸 極限偏差 基本尺寸 極限偏差 基本尺寸 極限偏差 
1 80 +2 10 +0.5 4 +0.2 60
2 50 +1 6 +0.2 4 +0.2 40
3 120 +2 15 +0.5 10 +0.5 70
4 125 +2 13 +0.5 13 +0.5 95

XJJ- 5/50 simple beam impact testing machine

1. Product
The equipment is mainly used for hard plastic, nylon, glass steel, ceramics, cast stone, electrical insulating material determination of non-metallic materials, such as impact toughness, is the chemical industry, scientific research units, colleges and quality inspection departments such as the ideal test equipment.
Ii. Compliance with standards:
1. GB/T 1043-2008 "method of impact test of hard plastic simple support beam";
= GB/T 1843-2008 plastic cantilever impact test method;
= ISO 179:2010 Plastics-Determination of Charpy impact properties;
= ISO 180:2000 "Plastics -Determination of Izod impact strength";
The test method for the shock test of fluid-conveying thermoplastic plastic pipe for conveying fluidic pipe in 18743-2002 (i.e., the impact of pipe material)
3. Main technical parameters
1 impact energy;
1J 2J 4J. 5J
2 pendulum preyy Angle: 160 degrees
3 impact velocity: 2.9m/s (less than 5J) 3.8m/s (greater than 5J)
4 impact blade Angle: 30 °
5 jaw radius: R1mm
6 impact blade radius: R2mm
Clamping distance: 40mm 60mm 70mm 95mm
Scale value of 8 scale: 1%
Sample type, size and support span are shown below
sample
Type length l width b thickness d support line
The distance between the L
Basic dimensions limit deviation basic size limit deviation
1 80 +2 10 +0.5 4 +0.2 60
2 50 +1 6 +0.2 4 +0.2 40
3 120 +2 15 +0.5 10 +0.5 70
4.

125 +2 13 +0.5 13 +0.5 95

XJ- 5/50 digital display y LCD flat beam shock testing machine

1. Product
The equipment is mainly used for hard plastic, nylon, glass steel, ceramics, cast stone, electrical insulating material determination of non-metallic materials, such as impact toughness, is the chemical industry, scientific research units, colleges and quality inspection departments such as the ideal test equipment.
Second, the characteristics of
Using the round grating measuring Angle technology, it has the characteristics of high precision, good stability and wide range of measurement
It has the function of calculating the punching power, the impact strength and the average of a batch of samples
It is convenient to check the Angle of elevation and lift Angle
4 display mode: LCD
Iii. Compliance with standards:
1. GB/T 1043-2008 "method of impact test of hard plastic simple support beam";
= GB/T 1843-2008 plastic cantilever impact test method;
= ISO 179:2010 Plastics-Determination of Charpy impact properties;
= ISO 180:2000 "Plastics -Determination of Izod impact strength";
The main technical parameters of the test method for the impact test of fluid-conveying thermoplastic tubular beam in the pipe material is used in GB/T 18743-2002
1 impact energy;
1J 2J 4J. 5J
2 pendulum preyy Angle: 160 degrees
3 impact velocity: 2.9m/s (less than 5J) 3.8m/s (greater than 5J)
4 impact blade Angle: 30 °
5 jaw radius: R1mm
6 impact blade radius: R2mm
Clamping distance: 40mm 60mm 70mm 95mm
The specimen type, size and support span are shown below
sample
Type length l width b thickness d support line
The distance between the L
Basic dimensions limit deviation basic size limit deviation
1 80 +2 10 +0.5 4 +0.2 60
2 50 +1 6 +0.2 4 +0.2 40
3 120 +2 15 +0.5 10 +0.5 70
4. 125 +2 13 +0.5 13 +0.5 95